• Svea Cooler
  • Svea Cooler

Svea Cooler

Enervent Svea Cooler is a ventilation machine with an integrated compressor cooling unit for the ventilation of small houses and apartment buildings. The maximum air flow of the ventilation machine is approx. 600 m³/h, so despite its small size, it is enough to serve a residential building with an area of about 200 m².

The advantage of Svea Cooler is that the cooling is achieved without any draft. The cooling is evenly distributed along the ventilation ducts to all rooms with an supply air valve. This is a clear advantage compared to, for example, a traditional air heat pump, which only cools the space where the indoor unit is. Svea Cooler also does not need a separate outdoor unit.

The Enervent Svea Cooler is equipped with a cooker hood duct that also passes through the cooling module. The cooler module can be retrofitted to previously purchased Svea machines.

Duct connections

The Svea Cooler is available with a right-handed duct connection layout.

Control options

eAir
eAir
Fan speed settingsThrough operation modes
Supply air temperature set point
Control of electrical after heater
Over pressure mode
Alarm and maintenance reminder
Humidity boosting
Possibility to connect two panels to one unit
Cooling recoveryAutomatic
KNX connectivity
Commissioning parameters view
On-off control for CHG brine pump
On-off control for GWC damper motor
Control for CHG coil 3-way valve motor
Exercising of brine pumps during standby
Exercising of the HRW during standby
Modbus RTU
Modbus TCP/IP
Stepless control of heat recovery
Control of damper motors
Control of electrical pre-heater
Control of water pre-heater/cooler
Control of water heater
Eco mode
Control of water cooler
Boosting function
Measurements view
Carbon dioxide boosting
Time programs
Summer night cooling
Temperature boosting
Compensation for hood/central vacuum cleaner
Constant duct pressure mode
Internet user interface
Time extension mode
Setup wizard
 Show more features
 Show less features

This feature is always included

This feature is available with extra equipment

+/- 540 m³/hMeasured at 100 Pa with F7/M5 filters
248 m²

Datasheet

Ø
Ducts
Ø 160 mm
Width
600 mm
Height
1125 mm
Depth
600 mm
Weight
90 kg
Install on wall or ceiling

Models

Product number Unit
P20 202 0002 Svea Cooler eAir E