App
eWind App – Take control of your air handling unit

Installing & Pairing eWind WiFi module
See how to install a WiFi module to an existing eWind panel installation and pair it with your eWind app on your phone.
Troubleshooting
In case you encounter an abnormal situation with pairing, please use the reset magnet provided in the product package. Hold the magnet to your WiFi module until the LED indicator turns off momentarily for a few seconds. After resetting, your WiFi module should return to unclaimed state (see LED code). Resetting can take up to 60 seconds.
NOTE! WiFi module only supports wireless networks operating at 2.4 GHz frequency. 5 GHz frequencies are not supported. Please ensure that your wireless network is operating at 2.4 Ghz frequency in your WLAN router settings.
WiFi module LED codes

WiFi module has no power
Check the cable connection and try to reset the WiFi module with a reset magnet.

WiFi module is unclaimed and in sleep mode
WiFi module hasn’t been paired with a phone yet and has gone to sleep mode due to inactivity. Reactivate the module by one of the alternatives:
- Swipe the side of the module with a reset magnet for 30-60 seconds.
- Power off the module by disconnecting and reconnecting the cable.
- Press ECO button on the eWind panel.

WiFi module is unclaimed and hosting a temporary WiFi access point
WiFi module hasn’t been paired with a phone yet and is waiting to be paired with a device. Access the eWind app on your phone and follow pairing instructions.

WiFi module is claimed and attempting to join a wireless network
WiFi module has been paired with a phone and is trying to join the wireless network you selected during pairing.

WiFi module is claimed and successfully joined a wireless network
WiFi module has been paired with a phone and has successfully joined the wireless network you selected during pairing.

WiFi module is claimed and hosting its own wireless network (no activity)
WiFi module has been paired with a phone. The module is working in local mode in its own wireless network (SSID mist-ewind-xx) without an internet access. No active clients connected. This mode is only used when there is no wireless home network available.

WiFi module is claimed and hosting its own wireless network (activity)
WiFi module has been paired with a phone. The module is working in local mode in its own wireless network (SSID mist-ewind-xx) without an internet access. Active clients connected. This mode is only used when there is no wireless home network available.
None of the above
Can’t find your LED code and already tried resetting the WiFi module? Unfortunately, it seems that your WiFi module may not be working correctly. Please, contact our customer support for assistance.